LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedure >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the second row seat.

    (Refer to Body - "REAR SEAT ")

  3. Remove the rear seat LH air duct (A) after loosening the mounting nuts.
    Fig 1: Locate Rear Seat LH Air Duct
    G11872176Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the seat cable bracket (A) after loosening the mounting nuts.
    Fig 2: Locate Seat Cable Bracket
    G11872177Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the fuel pump service cover (A) after loosening the mounting screws.
    Fig 3: Locate Fuel Pump Service Cover
    G11872178Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fuel tank pressure sensor (A) after disconnect the connector (B).
    Fig 4: Locate Fuel Tank Pressure Sensor Connector
    G11872179Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals