Repair Procedure: Removal

NOTE: Note that the SST (Part No: 09392-1Y100 or 09392-2H100) is used when removing the heated oxygen sensor.

[Bank 1/Sensor 1]

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the connector (A).

Fig 1: Locate Connector (Bank 1/Sensor 1)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the heated oxygen sensor (A).

Fig 2: Locate Heated Oxygen Sensor

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 1/Sensor 2]

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the connector (A).

Fig 3: Locate Connector (Bank 1/Sensor 2)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the heated oxygen sensor (A).

Fig 4: Locate Heated Oxygen Sensor

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 2/Sensor 1]

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the connector (A).

Fig 5: Locate Connector (Bank 2/Sensor 1)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the heated oxygen sensor (A).

Fig 6: Locate Heated Oxygen Sensor

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 2/Sensor 2]

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the connector (A).
Remove the heated oxygen sensor (B).

Fig 7: Locate Heated Oxygen Sensor Connector (Bank 2/Sensor 2)
Courtesy of KIA MOTORS AMERICA, INC.