Repair Procedure: Removal
- Turn the ignition switch off and disconnect the battery negative (-) Terminal.
- Remove the glove box housing.
(Refer to Body - "GLOVE BOX HOUSING ")
- Remove the AVM unit.
(Refer to the appropriate service information below.
- Disconnect the IDB connector (A).
- Remove the IDB (B) after looening the mounting bolt and nuts.
IDB Mounting Bolt/Nut:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)