Repair Procedure: Inspection

[Bank 1] 

1. Turn the ignition switch OFF.
2. Disconnect the knock sensor connector (A).
   Fig 1: Locate Knock Sensor Connector (Bank 1)

   Courtesy of KIA MOTORS AMERICA, INC.
3. Measure resistance between the injector terminals 1 and 2.
   Fig 2: Measure Resistance Between Injector Terminals 1 And 2

   Courtesy of KIA MOTORS AMERICA, INC.
4. Check that the resistance is within the specification.

   Specification:  About 4.87 MΩ [20°C (68°F)]

[Bank 2] 

1. Turn the ignition switch OFF.
2. Disconnect the knock sensor connector (A).
   Fig 3: Locate Knock Sensor Connector

   Courtesy of KIA MOTORS AMERICA, INC.
3. Measure resistance between the injector terminals 1 and 2.
   Fig 4: Measure Resistance Between Injector Terminals 1 And 2

   Courtesy of KIA MOTORS AMERICA, INC.
4. Check that the resistance is within the specification.

   Specification:  About 4.87 MΩ [20°C (68°F)]