Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the air cleaner assembly.
(Refer to "AIR CLEANER .")
Remove the battery and battery tray.
(Refer to "BATTERY .")
Disconnect the back up lamp switch connector (A).

Courtesy of
Remove the back up lamp switch (A).

Courtesy of
Replace a new one and install the back up lamp switch.
Tightening torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)