Variant Coding Procedure

■ On-Line type on GDS 

1. Ignition "OFF", connect scan tool.
2. Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
3. Select Variant coding mode.
4. Follow steps on the screen as below.
   1. Initial ACU Variant Coding screen

      Courtesy of

   2. VIN Code entering screen

      Courtesy of

   3. Variant coding's proceeding screen - 1

      Courtesy of

   4. Variant coding's proceeding screen - 2

      Courtesy of

   5. Variant coding is completed

      Courtesy of

   NOTE:

   1. Screen of Retrying the Variant coding after finishing variant coding

      Courtesy of

   2. Screen of communication failure

      Courtesy of

■ Off-line type on GDS (This can be used when not connecting to internet) 

1. Initial ACU Variant Coding screen

   Courtesy of

2. ACU CODING Code entering screen

   Courtesy of

3. Screen of rechecking ACU CODING code's entering

   Courtesy of

4. Variant coding's proceeding screen - 1

   Courtesy of

5. Variant coding's proceeding screen - 2

   Courtesy of

6. Variant coding is completed

   Courtesy of

   NOTE:

   1. Screen of Retrying the Variant coding after finishing variant coding

      Courtesy of