LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Cadenza Premium >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Multi Function Camera Diagnosis >> DTC C1672-86: SAS Message Counter Error >> DTC Inspection >> Monitor KDS/GDS Data
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Monitor KDS/GDS Data

  1. Ignition "OFF".
  2. Connect KDS/GDS to Data Link Connector (DLC).
  3. Ignition "ON" & Engine "ON".
  4. Turn the steering wheel.
  5. Monitor "Steering Angle Sensor" parameter in "Current Data" with KDS/GDS.
    Fig 1: Scantool Display - Current Data Of Steering Angle Sensor On Steering Wheel Activated
    G12280566Courtesy of KIA MOTORS AMERICA, INC.
  6. Is the parameter displayed within specification?

    YES 

    • Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
    • Repair or replace as necessary and then go to "VERIFICATION OF REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals