Component Inspection: Notes
- Ignition "OFF".
- Disconnect Battery (-) terminal.
- Refer to TCM REMOVAL and disconnect TCM connector.
- Measure resistance between Pin No. 26 (-) Terminal And Pin No. 25 (+) terminal of TCM harness connector.
Specification : Refer to Table below
Transmission Fluid Temperature Sensor Temp. °C (°F) Resistance (kΩ) Temp. °C (°F) Resistance (kΩ) 0°C (32°F) Approx. 5.88 100°C (212°F) Approx. 0.18 20°C (68°F) Approx. 2.51 120°C (248°F) Approx. 0.10 40°C (104°F) Approx. 1.19 140°C (284°F) Approx. 0.06 60°C (140°F) Approx. 0.61 150°C (302°F) Approx. 0.05 80°C (176°F) Approx. 0.32 - - - Is the measured value within specification?
YES
- Go to "PCM/TCM INSPECTION " procedure.
NO
- Carefully re-do this troubleshooting guide steps.
- If problem still occurs, replace Transmission Fluid Temperature Sensor and then go to "Verification Of REPAIR " procedure.