Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

Connect KDS/GDS and select "Diagnostic Trouble Codes (DTC)" mode.
Using a KDS/GDS, Clear DTC.
Operate the vehicle within DTC Detecting Condition in General Information.
Using a KDS/GDS, Check DTC present.
Are any DTCs present?
YES
- Go to the applicable DTC INDEX procedure.
NO
- System is performing to specification at this time.