Engine Control System
WARNING: This page is about a different car, the 2017 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE CONTROL SYSTEM TIGHTENING TORQUE SPECIFICATIONS
| Item | kgf.m | N.m | lb.ft |
|---|---|---|---|
| ECM installation bolt | 0.8 - 1.2 | 7.8 - 11.8 | 5.8 - 8.7 |
| ECM bracket installation bolt/nut | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Manifold absolute pressure sensor installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Engine coolant temperature sensor installation | 3.0 - 4.0 | 29.4 - 39.2 | 21.7 - 28.9 |
| Crankshaft position sensor installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Camshaft position sensor (Bank 1/Intake) installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Camshaft position sensor (Bank 1/Exhaust) installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Knock sensor installation bolt | 1.9 - 2.4 | 18.6 - 23.5 | 13.7 - 17.4 |
| Heated oxygen sensor (Bank 1/sensor 1) installation | 4.0 - 5.0 | 39.2 - 49.1 | 28.9 - 36.2 |
| Heated oxygen sensor (Bank 1/sensor 2) installation | 4.0 - 5.0 | 39.2 - 49.1 | 28.9 - 36.2 |
| Electronic throttle body installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Purge control solenoid valve bracket installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| CVVT oil control valve (Bank 1/Intake) installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| CVVT oil control valve (Bank 1/Exhaust) installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Variable intake solenoid valve bracket installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Ignition coil installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Variable charge motion actuator installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |