LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Multi Function Camera Diagnosis) >> DTC C1623-87: CAN Time-out Steering Angle Sensor >> DTC Information >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • CAN signal monitoring
  1. Poor connector connection
  2. Short in SAS CAN circuit
  3. SAS
  4. LDWS/LKAS ECU
Enable Conditions
  • 3s after Engine "ON".
  • Normal battery voltage (9±0.5 - 16±0.5V)
  • DTC C1616-88/C1611-87/C1613-86 are not stored.
Threshold Value
  • SAS CAN message is not received
Detecting Time
  • LKAS: Conditional/LDWS: 500ms
Recovery Time
  • 0.1s
Recovery Condition
  • SAS CAN message is received.
  • Ignition "Off" & "On"
Warning Lamp
  • LDWS/LKAS Lamp "ON"/FCW Lamp "ON"
Fail-Safe LDW
(Lane Departure Warning)
  • Function inhibited
LKA
(Lane Keeping Assist)
  • Function inhibited
HBA
(High Beam Assist)
  • Function inhibited
FCW
(Forward Collision Warning)
  • Function inhibited
Fusion
  • Function inhibited
SLIF
(Speed Limit Information Function)
  • Function inhibited
scientia non olet · About LEMON Manuals