LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Forte S >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L MPI Nu (3 Of 3) >> DTC P2017: Intake Manifold Runner Position Sensor/Switch Circuit High (Bank 1) >> DTC Information >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Electrical Check
  1. Poor connection or damaged harness
  2. Open/short to battery in VCM position sensor circuit
  3. VCM position sensor
Enable Conditions
  • Battery voltage is between 10V and 16V
  • Ignition "ON"
Threshold Value
  • Flap feed back Signal voltage is higher than 4.751V
Diagnostic Time
  • 0.12s
MIL ON Condition
  • 2 driving cycles
scientia non olet · About LEMON Manuals