Verification Of Vehicle Repair
WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
After a repair, it is essential to verify that the fault has been corrected.
- Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
- Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
- Is any DTC output again?
YES
- Go to the applicable DTC INDEX procedure.
NO
- System performing to specification at this time.