LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Airbag Modules And Clock Spring (Except HEV)) >> Curtain Airbag (CAB) Module >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning to work.
  2. Install the curtain airbag and then loosen the bolts and nuts.

    Tightening torque 

    Bolts: 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)

    Nuts: 3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb.ft)

    CAUTION: Never twist the airbag module when installing it. If the module is twisted, airbag module may operate abnormally.
  3. Connect the curtain airbag connector.
  4. Install the roof trim.

    (Refer to Body (Interior and Exterior) - "Roof Trim Assembly ")

  5. Reconnect the battery negative cable.
  6. After installing the curtain airbag (CAB), confirm proper system operation:
    • Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
scientia non olet · About LEMON Manuals