Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the resonator and the air intake hose.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the intercooler inlet pipe & hose assembly (A).

Fig 1: Removing Intercooler Inlet Pipe & Hose Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the intercooler outlet pipe & hose (A).

Fig 2: Disconnecting Intercooler Outlet Pipe & Hose
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the ETC module connector (A).
Disconnect the coolant hoses (B).
Remove the installation bolts (C), and then remove the ETC module from the engine.

Fig 3: Disconnecting ETC Module Connector
Courtesy of KIA MOTORS AMERICA, INC.