Measuring Resistance
WARNING: This page is about a different variant/trim than selected.
- Disconnect the cruise control switch connector from the control switch.
- Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
Function switch Terminal (A Connector) Resistance (kΩ) [± 5%] CANCEL 2 - 5 0.18 SET - 2 - 5 0.33 RES + 2 - 5 0.55 CRUISE 2 - 5 0.88 ASCC 2 - 5 2.54 - If not within specification, replace switch.