Component Inspection: Notes
- Ignition "OFF"
- Disconnect Battery (-) terminal.
- Refer to TRANSAXLE CONTROL MODULE (TCM) and disconnect PCM/TCM connector.
- Measure resistance between Pin No. 48 (-) terminal and Pin No. 92 (+) terminal of PCM/TCM harness connector.
Specification : Refer to Table below
Temp. °C (°F) Resistance (kΩ) Temp. °C (°F) Resistance (kΩ) Transmission Fluid Temperature Sensor -40°C (-40°F) Approx. 48.1 60°C (140°F) Approx. 0.59 -20°C (-4°F) Approx. 15.6 80°C (176°F) Approx. 0.32 0°C (32°F) Approx. 5.88 100°C (212°F) Approx. 0.18 20°C (68°F) Approx. 2.51 120°C (248°F) Approx. 0.11 40°C (104°F) Approx. 1.17 140°C (284°F) Approx. 0.07 - Is the measured value within specification?
YES
- Go to "PCM/TCM INSPECTION " procedure.
NO
- Carefully re-do this troubleshooting guide steps.
- If problem still occurs, replace Transmission Fluid Temperature Sensor and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.