Repair Procedures: Removal

Disconnect the Negative (-) Battery Terminal.
Remove the Steering Column Upper and Lower Shrouds.
(Refer to "STEERING COLUMN ")
Disconnect the ignition switch connector (B) and the key switch connector (A) from under the steering column.

Fig 1: Disconnecting Ignition Switch Connector And Key Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder after pushing lock pin with key ACC.

Fig 2: Removing Key Lock Cylinder

Courtesy of KIA MOTORS AMERICA, INC.