LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Sedona L >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC P0552: Power Steering Pressure Sensor/Switch Circuit Low Input >> DTC Inspection >> Monitor DTC Status
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor DTC Status

  1. Connect GDS to Data Link Connector(DLC).
  2. Ignition "ON"
  3. Monitor "Diagnostic Trouble Codes(DTC)  " with GDS.
    Fig 1: Scantool Display - Diagnostic Trouble Code
    G12274176Courtesy of KIA MOTORS AMERICA, INC.
  4. Is DTC status displayed as Present?

    YES 

    NO 

    • Fault is intermittent caused by poor contact in the sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification of Vehicle Repair " procedure.
scientia non olet · About LEMON Manuals