LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Sorento L >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Yaw-Rate And G Sensor >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

  1. Remove the ignition key from the vehicle.
  2. Install in the reverse order of removal.
  3. After installing the SRSCM, confirm proper system operation:
    • Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
CAUTION:
  • This SRSCM senses vehicle rollover. SAB, CAB, and BPT may activate in case of mechanic movement of the SRSCM on vehicle during IGN On state. For this reason, turn the IGN OFF completely before removing the SRSCM from the vehicle.
  • If the SRSCM is replaced, always perform variant coding. Also, perform the lateral G sensor calibration.

    (Refer to "SRS CONTROL MODULE and G-Sensor Calibration  below")

scientia non olet · About LEMON Manuals