LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Soul Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System (BSD) >> Blind Spot Detection Unit >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • The shapes of the LH and RH blind-spot detection (BSD) units are different. Therefore, take notice when installing the BSD units.
    • After the replacement of BSD unit or wire, perform the radar calibration procedures. (If do not calibrate the sensor angle, it can cause the malfunction of BSD system.)

      (Refer to Blind Spot Detection system - "BLIND SPOT DETECTION RADAR CALIBRATION ")

scientia non olet · About LEMON Manuals