Neutralization Status Check

WARNING: This page is about a different car, the 2016 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
After IGN ON, select the "Neutralization mode".

Fig 1: Scantool Display - ID Register
Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Scantool Display - Neutralization Mode
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Scantool Display - ECM Neutralization
Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Scantool Display - ECM Neutralization (Test Complete)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Scantool Display - SMK Neutralization
Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Scantool Display - SMK Neutralization (Pin Code)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: Scantool Display - SMK Neutralization (Test Complete)
Courtesy of KIA MOTORS AMERICA, INC.