LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) & Sensors >> Occupant Classification System (OCS) >> Repair Procedures >> Installation >> Occupant Classification System (OCS) Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Occupant Classification System (OCS) Unit

  1. Install the occupant classification system unit on the Front seat track assembly.
  2. Connect the occupant classification system unit connector.
  3. Install the front passenger seat assembly.

    (Refer to Body - "FRONT SEAT ASSEMBLY ")

  4. Reconnect the battery negative cable.
  5. After installing the occupant classification system, confirm proper system operation.
    NOTE:
    • Turn the ignition switch ON the SRS indicator should be turned on for about six seconds and then go off.
    • Telltale lamp will turn on for 4 seconds and be turned off for 3 seconds. After the 7 seconds, it shall remain off if the OCS does not require suppression and the passenger airbag is enabled.
    • Be sure to perform OCS reset with GDS after replacing OCS unit.
scientia non olet · About LEMON Manuals