LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Forte LX, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Autonomous Emergency Braking System Diagnosis >> DTC C16B1-87: Camera Sensor Failure - Time-Out >> Wiring Inspection >> CAN Communication Line Inspection >> Check Open In CAN Communication Line.
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Open In CAN Communication Line.

  1. Ignition "OFF"
  2. Disconnect LDWS/LKAS Module connector and AEB Module connector.
  3. Measure the resistance between Pin No. 12 (C-CAN high) terminal of LDWS/LKAS Module harness connector and Pin No. 22 (C-CAN high) terminal of AEB harness connector.
  4. Measure the resistance between Pin No. 11 (C-CAN low) terminal of LDWS/LKAS Module harness connector and Pin No. 23 (C-CAN low) terminal of AEB harness connector.

    Specification:  below 1Ω

  5. Is the measured value within specification?

    YES 

    • Check LDWS/LKAS, AEB Module connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals