LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Forte S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 2.0L GDI) >> Engine Control Module (ECM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the battery. (Refer to Engine Electrical System - "BATTERY ")
  3. Disconnect the ECM Connector (A).
  4. Remove the mounting bolts (B) and then remove the ECM bracket assembly (C).
    Fig 1: Disconnecting ECM Connector
    G12162378Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the mounting nuts (A), and then remove the ECM (B) from the ECM bracket assembly.
Fig 2: Removing ECM Mounting Nuts
G12162379Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals