| DTC Strategy |
- Fuel injector driver monitoring
|
- Poor connector connection
- Unstable Power
- Faulty ECM
|
| Enable Conditions |
Case 1 |
- Engine speed during engine start is higher than 32RPM
- Time delay after "Engine running" elapsed is higher than 0.3s
|
| Case 2 |
* Engine speed is higher than 32RPM |
| Threshold Value |
cCase 1 |
- Mean value of boost voltage is lowet than 50V
- Mean value of boost voltage is higher than 75V
|
| Case 2 |
* SPI bus communication error detected |
| Diagnostic Time |
Case 1 |
|
| Case 2 |
Continuous |
| MIL ON Condition |
|