DTC Information: DTC Detecting Condition
| Item | Detecting Condition | Possible Cause |
|---|---|---|
| DTC Strategy | * Deviation check between actual CAM position and CAM setpoint position (steady deviation) | 1. Poor Connector Connection 2. Faulty Cam Phaser 3. Faulty Intake E-CVVT Assembly |
| Enable Conditions | * Camshaft set-point moved more than 0 times since engine start * Camshaft set-point not close to full retard position (3°CRK away from full retard position) * Camshaft set-point close to full retard position (25 to 45 engine revolutions passed after camshaft set-point changes, depending on RPM/Oil temperature model) * Camshaft set-point minus actual position more than 5.25° * Engine speed at between 450RPM and 5000RPM * Engine oil temperature at between 68°F(20°C) and 248°F(120°C) * Battery voltage at between 10V and 16V |
|
| Threshold Value | * Integral of Camshaft position actual value - Camshaft position setpoint higher than 85° | |
| Diagnostic Time | * Immediate | |
| Mil On Condition | * 2 Driving Cycles |