LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Rio LX, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - " RELEASE RESIDUAL PRESSURE IN FUEL LINE  ") 

  2. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  3. Remove the intake manifold.

    (Refer to Engine Mechanical System - " INTAKE MANIFOLD  ") 

  4. Remove the delivery pipe foam (A).
    G12576590Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
    G12576591Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals