LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Sedona SX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air intake hose (A) after disconnect the hose and clamp.
    Fig 1: Locating Air Intake Hose
    G12274596Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
    Fig 2: Locating ETC Module Connector And Coolant Hoses
    G12274597Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the installation bolts, and then remove the ETC module (A) from the engine.
    Fig 3: Locating ETC Module
    G12274598Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals