Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Perform the oil pressure characteristics backup procedure using the KDS/GDS when replacing with a new TCM.

Fig 1: Scantool Display - Oil Pressure Characteristics Backup Procedure
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the battery.
(Refer to Engine Electrical System - "BATTERY ")
Remove the TCM (B) by loosening the bolts after disconnecting the TCM connector (A).
Tightening torque:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Fig 2: Locating TCM And Connector With Bolts
Courtesy of KIA MOTORS AMERICA, INC.