Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the battery. (Refer to Engine Electrical System - "BATTERY ")
Disconnect the ECM Connector (A).

Fig 1: Locating ECM Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the mounting bolts (A) and nut (B) and then remove the ECM bracket assembly (C).

Fig 2: Locating ECM Bracket Assembly, Mounting Bolts And Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the mounting nuts (A) and then remove the ECM (B) from the ECM bracket assembly.

Fig 3: Locating ECM Bracket Assembly, ECM And Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.