LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Control System - 1.6L) >> Engine Control Module (ECM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the battery. (Refer to Engine Electrical System - "BATTERY ")
  3. Disconnect the ECM Connector (A).
  4. Remove the mounting bolts (B) and nut (C), and then remove the ECM bracket assembly.
    Fig 1: Locating ECM Connector, Mounting Bolts And Nut
    G12227219Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the ECM after removing the nuts (A) from the bracket.
    Fig 2: Locating ECM Bracket Nuts
    G12227220Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals