LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 2/Intake]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 2/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the mounting bolt, and then vertically remove the sensor (B) from the cylinder head cover.
Fig 1: Disconnecting Camshaft Position Sensor Connector (Bank 2/Intake)
G12181497Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals