LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Forte FE, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Engine Control Module (ECM) >> Repair Procedures >> Removal And Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal And Installation

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the battery.

    (Refer to Engine Electrical System - " BATTERY  ") 

  3. Disconnect the ECM connector (A).
  4. Remove the mounting bolts and nut, and then remove the ECM bracket assembly (B).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G12830207Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the ECM (B) after loosening the mounting nuts (A) from the bracket.

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G12830208Courtesy of KIA MOTORS AMERICA, INC.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals