Repair Procedures: Installation

Install in the reverse order of removal.

NOTE:

The vertical installation angle of the unit must be within -2° ± 0.4°. (not 0 degree)

* Before installing the bumper onto the vehicle, measure the vertical angle of the unit with a protractor as shown.

Courtesy of KIA MOTORS AMERICA, INC.

Adjust to "target vertical angle" by turning adjusting screw (A) of front radar.
- turning clockwise: adjusting (+) angle
- turning counterclockwise: adjusting (-) angle

Courtesy of KIA MOTORS AMERICA, INC.

Number of adjustment screw rotation	Correction angle
Number of adjustment screw rotation	Clockwise	Counter clockwise
0.5	+ 0.5°	-0.5°
1	+ 1.0°	- 1.0°
1.5	+ 1.5°	- 1.5°
2	+ 2.0°	- 2.0°
2.5	+ 2.5°	- 2.5°
3	+ 3.0°	- 3.0°
3.5	+ 3.5°	- 3.5°
4	+ 4.0°	- 4.0°
4.5	+ 4.5°	- 4.5°
5	+ 5.0°	- 5.0°

Align the variant coding procedure.
(Refer to Adjustment - " VARIANT CODING ")
Align the smart cruise control radar sensor.
(Refer to Adjustment - " SMART CRUISE CONTROL (SCC) ALIGNMENT ")