| DTC Strategy |
- Monitor the circuit (Check the open circuit and short circuit)
|
- Open or short circuit
- Faulty driven pulley pressure sensor
- Faulty PCM
|
| Enable Condition |
Case1 |
- Battery voltage is higher than 10V
- Engine speed is higher than 350RPM
- Lever Position in "D" or "Sports" (Forward Gear)
- Oil temperature is higher than -0°C
|
| Case2 |
- Battery voltage is higher than 10V
- Engine speed is higher than 350RPM
- Solenoid "ON"
- APS is less than 0%
|
| Threshold Value |
Case1 |
- The output voltage of the sensor is between 2.5V and 3.5V
|
| Case2 |
- Difference between the target driven pulley pressure and the actual driven pulley pressure is higher than 4bar
|
| Detecting Time |
|
| Fail Safe |
|
| MIL ON Condition |
|