| DTC Strategy |
- Check the installation angle or perform the calibration
|
- Faulty the BCW installation angle
- Not complete the calibration
|
| Enable Conditions |
- 2s elapsed after ignition "ON"
- Normal input voltage condition (C110117/C110216, the DTC is not generated)
|
| Threshold Value |
- No execution of calibration
- When sensor installation angle is out of specification range (±7.3 degree)
|
| Detecting Time |
|
| Symptom |
- Displays the faulty the BCA in the cluster
- BCW switch LED "OFF"
|
| Fail Safe |
- Blind spot alert inhibited
|
| Clear Condition |
- Normal input voltage condition (C110117/C110216, the DTC is not generated)
- Correct installation
|