| DTC Strategy |
- Deviation check between actual CAM position and CAM setpoint position (steady deviation)
|
- Poor Connector Connection
- Faulty Cam Phaser
- Faulty Intake E-CVVT Assembly
|
| Enable Conditions |
- Camshaft set-point moved more than 0 times since engine start
- Camshaft set-point not close to full retard position (3°CRK away from full retard position)
- Camshaft set-point close to full retard position (25 to 45 engine revolutions passed after camshaft set-point changes, depending on RPM/Oil temperature model)
- Camshaft set-point minus actual position more than 5.25°
- Engine speed at between 450 RPM and 5000 RPM
- Engine oil temperature at between 68°F (20°C) and 248°F (120°C)
- Battery voltage at between 10V and 16V
|
| Threshold Value |
- Integral of Camshaft position actual value - Camshaft position setpoint higher than 85°
|
| Diagnostic Time |
|
| Mil On Condition |
|