LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Optima LX >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 6) (PHEV) >> DTC P00D2-00: HO2S Heater Control Circuit Range/Performance Bank 1 Sensor 2 >> Wiring Inspection >> Control Circuit Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Circuit Inspection

  1. Ignition "OFF".
  2. Refer to HEATED OXYGEN SENSOR (HO2S) and disconnect Downstream O2 Sensor connector.
  3. Ignition "ON".
  4. Measure voltage between Pin No. 4 (Control) terminal of Downstream O2 Sensor harness connector and chassis ground.

    Specification:  Approx. 0.8V (Duty)

  5. Is the measured value within specification?

    YES 

    NO 

    • Repair open or short in control circuit between Downstream O2 Sensor and ECM/PCM and then go to "VERIFICATION OF REPAIR " procedure.