October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ECM Neutral Mode procedure (With Immobilizer)

WARNING: This page is about a different variant/trim than selected.

After replacing the ECM of the vehicle with the immobilizer, the following procedure must be performed.
[If installing a used ECM]
1. Perform "ECM Neutral Mode" procedure using KDS.
  (Refer to Body Electrical System - "Immobilizer System - REPAIR PROCEDURES ")
2. After finishing "ECM Neutral Mode", perform "Key Teaching" procedure using KDS.
  (Refer to Body Electrical System - "Immobilizer System - REPAIR PROCEDURES ")
  
  [If installing a new ECM]
  
  Perform "Key Teaching" procedure using KDS.
  
  (Refer to Body Electrical System - "Immobilizer System - REPAIR PROCEDURES ")