September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Repair Procedures: Inspection
- Switch "OFF" the ignition.
- Disconnect the OTS connector.
- Remove the OTS.
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
- Check that the resistance is within the specification.
| Temperature |
Resistance (kΩ) |
| °C |
°F |
| -40 |
-40 |
41.74 - 54.54 |
| -20 |
-4 |
14.13 - 16.83 |
| 0 |
32 |
5.28 - 6.3 |
| 25 |
77 |
1.88 - 2.14 |
| 80 |
176 |
0.31 - 0.33 |
| 140 |
284 |
0.07 - 0.08 |