Repair Procedures: Removal
WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
- Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
- Disconnect the vacuum hose (A).
- Disconnect the intake temperature sensor connector (B).
- Remove the sensor after loosening the mounting bolt.
Intake Air Temperature Sensor (IATS) mounting bolt:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)