LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Sorento L >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 2.4L >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  3. Remove the second row seat.

    (Refer to Body - "REAR SEAT ")

  4. Remove the rear seat LH air duct (A) after loosening the mounting nuts.
    G12848695Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the seat cable bracket (A) after loosening the mounting nuts.
    G12848696Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fuel pump service cover (A) after loosening the mounting screws.
    G12848697Courtesy of KIA MOTORS AMERICA, INC.
  7. Disconnect the fuel feed tube quick-connector (A), fuel pressure sensor connector (B), fuel pump control module (C) and fuel tank pressure sensor (D).
    G12848698Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the fuel pump plate cover (A) by using the special service tool (B) [No.: 09310-B8100].
    G12848699Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the fuel pump (A) from the fuel tank.
    G12848700Courtesy of KIA MOTORS AMERICA, INC.
    G12848701Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals