LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Soul Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Multi-Function Camera Diagnosis >> DTC C1702-46: Variant Coding Error >> Component Inspection >> Variant Coding Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Variant Coding Procedure

  1. Ignition switch "OFF"
  2. Connect KDS/GDS to Data Link Connector (DLC).
  3. Ignition switch "ON"
  4. Select "Vehicle S/W Management  " on KDS/GDS.
  5. Perform "LKAS/LDWS Variant Coding" in "Vehicle S/W Management  " with KDS/GDS.
    Fig 1: Scantool Display - LKAS/LDWS Variant Coding 1
    G12216382Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Scantool Display - LKAS/LDWS Variant Coding 2
    G12216383Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Scantool Display - LKAS/LDWS Variant Coding 3
    G12216384Courtesy of KIA MOTORS AMERICA, INC.
  6. Clear any DTCs stored in the system with KDS/GDS.
  7. Re-check DTC in the system with KDS/GDS.
  8. Did the same DTC is stored in the system?

    YES 

    • Carefully re-do this troubleshooting guide steps.
    • If no problems still occurs, replace LDWS ECU and then go to "Verification of Vehicle Repair " procedure.

    NO 

scientia non olet · About LEMON Manuals