Repair Procedures: Replacement

Remove the ATF drain plug (A), allow the fluid to drain out and then reinstall the drain plug.
Tightening torque:

22.6 - 24.5 N.m (2.3 - 2.5 kgf.m, 16.6 - 18.1 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.

NOTE: The existing ATF drain plug o-ring must be replaced with a new one. (Do not reuse it.)

Courtesy of KIA MOTORS AMERICA, INC.
Fill the automatic transmission with about 7.0 L of ATF SP-IV-RR through the ATF filler hole.
Perform the ATF level check procedure.
(Refer to Fluid - " INSPECTION ")