Repair Procedures: Inspection
- Switch "OFF" the ignition.
- Disconnect the OTS connector.
- Remove the OTS.
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
- Check that the resistance is within the specification.
Temperature Resistance (kΩ) °C °F -40 -40 4174 - 54.54 -2C A 14.13-16.83 0 32 5.28 - 6.3 25 77 1.88-2.14 80 176 0.31 - 0.33 140 284 0.07 - 0.08