LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (5 Of 6) >> DTC P061A-00: Internal Control Module Torque Performance >> DTC Information >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Level 2 monitoring (=Process monitoring)
  1. Poor Connector Connection
  2. Faulty ECM
Enable Conditions
  • Ignition "ON".
  • Engine speed during engine start is higher than 32RPM
Threshold Value
  • Actual value is higher or lower than allowable range (ADC monitoring or Engine speed ratio monitor or Idle speed controller monitor or torque loss monitor or Min/Max Clutch torque monitor or Pedal value monitor or TPS ratio monitor or Mass fuel flow monitor errors)
Diagnostic Time
  • 480ms
MIL ON Condition
  • 1 driving cycle
scientia non olet · About LEMON Manuals