LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Forte FE, Standard Trans >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle Control System - 2.0L >> Control Shaft Complete >> Repair Procedures >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • When installing, set control shaft lever to neutral position (A).
      G13307277Courtesy of KIA MOTORS AMERICA, INC.
    • Apply the sealant to the contact surface of transaxle and control shaft.

      Specified sealant:  Anaerobic adhesive for flange

      G13307278Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals