Verification Of Vehicle Repair
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
After repair, it is essential to verify whether the faults have been corrected.
- Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
- Erase the DTCs and test the vehicle according to the DTC Setting Condition in DTC Information.
- Did the same DTC return?
YES
- Go to the applicable Troubleshooting (DTC INDEX ) procedure.
NO
- The system is running properly in line with the specifications at this time.