LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 537 (Electronic Stability Control (ESC) System) >> ESC Control Module >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
  2. After installation, bleed the brake system.

    (Refer to Brake system - "BRAKE BLEEDING PROCEDURES ")

  3. Conduct the Variant coding.
  4. Conduct the Auto Detected Sensor Calibration.
  5. Conduct the Longitudinal G Sensor Calibration.
  6. After replacing the ESP control module execute the "Assembly Check (ECU replacement)" of the additional function to check that the mounting is successful.
scientia non olet · About LEMON Manuals